My new e30 .. 1984 325e :D

[jtuner]

Here's my new whip!! Check it

[runetang]

very nice.. car has tons of potential too. I'd get the Rieger kit. or even better, the m-tech bmw kit, or a knock off - [;

itheres some kind of bumper mod you can do on those e30's, removing the springs from the bumpers, allowing the bumpers to be pushed in, then painted over, giving it a more modern look,


if any e30 guys wanna explain this process please do. thx.

[DINANFIVE]

cool but not diggin the wheels and it needs a drop

[533i]

*hands over a set of springs*

Thats cool dude. Not really diggin the wheels, but wuteva.

I like the color!

[galantv600]

color sets off rims nicely but might wanna change em!!! those are imports rims... u need luxury but sport ones drop it... tell me those are actual seats stead of seat covers!!!

[jtuner]

LOL Thanks for the feedback guys... yeah I'm feelin the white,, but maybe not 18s... i was thinking maybe like 5 spoke 16s and then puttin a drop on it...

The seats are seat covers unfortunatly ... There's still some stuff left over from autozone that needs to be taken out.... But the body is clean and there's a ton of potential left in the car...

runetang: do you know any websites that sell those kits? also I would love to know the mod to push the bumpers in!!

Thanks ya'll

[///Samson]

Nice ride! You look proud of it - that's most important.
You could take over Randy Spears look -- that car no longer exists (stolen ) ugh.. But it is hotness.

[jtuner]

STOLEN!!?? That's shitty!!
That's the M3 that got me in to e30s in the first place!!
I have the video of dado and him going through a tunnel... that sumbitch is bad!
What kind of rims are those, do you know? And is that the rieger kit?
Such a clean ride,,, whatta waste
Also,, how the hell do you attach side skirts to these things? I know my honda, the skirts bolted over the stock skirts... I see nothing to bolt to here, other than the body!

Keep the comments commin guys,, I don't want this car ending up a ricer like my old hondas!.... and yes,, I am ashamed....

[///Samson]

Stats on Randy's past 1988 E30 325e

- 3.2L M50/B32 motor & tranny (1999)
- 18"x 8" (+23mm ET) Compomotive wheels
- Vortech V9 G-trim blower (8 psi) w/Aftercooler
- Heavily ported/polished, knife cut, port matched head
- M50 325i bored T-Body, AFM, ECU (1994)
- 3.0L M3 higher flowing intake plenum (1995)
- Genie Headers
- M5 motor mounts
- Dual 2.25" mandrel bent exhaust
- HiFlow cat and Brullen Muffler
- Custom Mapped GIAC chip
- UUC complete short shift kit
- Sachs race clutch (stage 3)
- Lightened flywheel (13 lbs)
- 3:23 LSD differencial
- 215/35 VR 18 BFGoodrich Scortcher tires
- OBX coilover springs
- Bilstien sport shocks
- Suspension Techniques adj. sway bars
- Urethane Bushings/solid shock mounts
- Porsche 930 Turbo calipers
- M5 brake master cylinder
- 325ix brake booster
- Sparco front strut bar
- SCCA 6-point roll cage
- Electon Blue Pearl paint
- Rieger front and rear bumpers
- M-Tech sides skirts and wing
- Honda '93 Civic hatch rocker skirts
- Kamei grill spoilers
- Dechromed trim
- M3 relocated antenna
- Clear front turn signal/side repeaters
- All-RED rear tail lights
- Hella H.I.D. Xenon light conversion
- PIAA 1100X Dichronic Platinum fog lights
- Automotive grade black reupholstered carpet
- M3 black roof liner
- Door skins from a '91 318is
- OBX reclinable racing seats
- MOMO fighter wheel
- MOMO Air-Aluminum shift knob
- Custom billet shift gate & handbrake handle
- Aluminum floor mats
- Full Autometer Phantom guages
- OB white face E30 guage cluster
- Kenwood Excelon KDC-815X head unit
- Zapco AG360 & AG200 Amps
- JL Audio 12W3 subwoofer
- Eclipse 5.25" components front
- Cerwin Vega 5.25" components back
- Valentine One Laser/Radar detector

[bimmerdremer]

Nice car! I see alot of potential also. My suggestions for free mods would be to black out the window trim and push-in the bumpers: Get a cobalt drill bit and drill holes in the bumper shocks (rears are air filled, fronts have some nasty sh*t in em that sprays out so be prepared). Then you can do as I did and find a fellow e30 driver to go bumper to bumper and slowly push them in (they recess about 5in.) Its a dramatic change!
I also have the rieger GTS kit, its great for cars like yours because it comes down so low. (see my gallery for pics) The installation is a biotch. I had to weld supports on the side for extra strenth. I also had alot of fiberglass work done on the fenders and sides to eliminate that empty-look. But contact JM Precision if your intrested in the kit.
I like the wheels, they fit well. If your thinking of selling them soon let me know I might be intrested in taking them off your hands.

[ROBM3]

decent look ...keep it up