KHOR motorsports - supply aftermarket accessories

DCR62 · #1 (**permalink**) 02-28-2003, 05:30 PM

Peoples,

I have just got home from a saturday moring drive and went looking for some more bits for the car. I went to KHOR Motorsports here in brisbane as they are the ones that did my rear spoiler 12 monthes ago.

Scott, the owner was unaware of this forum and I said I would let you know about him.

Firstly I have no affiliation with them and have only dealt with them on one occassion( My rear spoiler - Fitted and Painted with L.E.D $330.00)

He is a distributor for Rieger, Hamman and Breyton amongst others.

I have just picked upa set of e36 eyebrows that will be fitted and painted for $180.00. They are injected molded plastic and he gaurentees fitting etc.

He has quoted my for a M3 style front spoiler $300 +$50 to fit + painting. (he is getting abck to me on the paint cost.) This seems very competitive to what I have been looking around at. As I said I can only speak for the rear spoiler but it looks and fitted well. The rear spoiler to 5 days from me ordering it to it being on the back of the car.

He is very enthusiastic and was always happy to assist.

Perhaps give them a call to see if they have what you may be looking for. They also run the Quik Fit tyre service next door for all tyres and mags.

Their address is

KHOR Motorsports
73 Enoggera Road,
Newmarket Qld 4051
PH: 07 38560098
email: bmwkhor@hotmail.com

www.Khor.com.au

I believe the web site is still under construction.

enjoy

dunitt_e36 · #2 (**permalink**) 02-28-2003, 07:00 PM

I just sent them an email....do you know if they sell M3 mirrors & side skirts?

Thanks,
Daniel

DCR62 · #3 (**permalink**) 02-28-2003, 07:10 PM

I know that he sells m3 mirrors, as I saw them when I was there this morning. I believe they were Hamman. Like the look and may do some myself at a later date. Let me know what price he gave you if you contact him.

As for the side skirts I am not sure but he does have a photo album full of stuff he has done to both e36/39/34/46 etc, so I suppose he would be able to do them for you.

He will be there for most of the day as he is also running the trye/wheels shop next door so you may want to ring him and check.

Just going through the sheet he gave me he does;
headlight brows, updated chrome grills, dash kits, clear/smoked indicators, eibach suspension, king suspension, momo products, and of course all wheels and tyres. He would proberly be able to source most products.

dunitt_e36 · #4 (**permalink**) 02-28-2003, 07:13 PM

Thanks mate.....i think ill just hang on for the email, dont mind if its a while....dont really wanna call interstate, lol

Daniel

BMWBOY · #5 (**permalink**) 02-28-2003, 07:17 PM

Sounds good Dave

I will speak to them this week.

#6 (**permalink**) 02-28-2003, 08:28 PM

mmmmmmm rieger m3 lip and rieger sideskirts i want.....i want

steve

Beema · #7 (**permalink**) 02-28-2003, 08:39 PM

Anyone have a pic of that lip, ive been thinking about getting one but i dont want a huge one due to how low my car is now!

dunitt_e36 · #8 (**permalink**) 02-28-2003, 08:57 PM

Beema - are you talking about a reiger lip for a stock front bumper, or m3 front bumper? The lip on the M3 front bumper looks real big.....ive got a picture of it in my gallery...its on "M3 Gurl"s car....makes the m3 bumper so much lower.....very nice though!!!

Daniel

BTW, Steve, is there any difference in the reiger sideskirts and m3 ones?

nicot · #9 (**permalink**) 02-28-2003, 10:26 PM

Remember people there are M3 bumpers and M3 "style" bumpers same goes with mirrors and all that..

That rieger lip I was thinking to get before the accident its basically the same as the Infinity I bumper but just an add on.. Same as Behmers front..

DCR62 · #10 (**permalink**) 02-28-2003, 10:59 PM

Quote:

Remember people there are M3 bumpers and M3 "style" bumpers same goes with mirrors

I agree totally but good quality workmanship is still good quality workmanship

#11 (**permalink**) 03-01-2003, 04:57 AM

Quote:

Originally posted by dunitt_e36
Beema - are you talking about a reiger lip for a stock front bumper, or m3 front bumper? The lip on the M3 front bumper looks real big.....ive got a picture of it in my gallery...its on "M3 Gurl"s car....makes the m3 bumper so much lower.....very nice though!!!

Daniel

BTW, Steve, is there any difference in the reiger sideskirts and m3 ones?

yeah the reiger ones are thicker than normal m3, thus giving the impression the car sits lower !!

steve

dunitt_e36 · #12 (**permalink**) 03-01-2003, 05:15 AM

Quote:

Originally posted by nicot
Remember people there are M3 bumpers and M3 "style" bumpers same goes with mirrors and all that..

I know that if i get "M3 style" mirrors, the quality will not be as good as the real thing....but if they still look like M3 mirrors, id most likely go with them, coz ive heard OEM M3 mirrors can cost between $900-1000 .....and i cant fork out that sortta money just for mirrors ATM

On the other hand, if it came to something like a front/rear bumper, i would prefer to get an original, because by being closer to the ground, there is more chance of damage, and being OEM, i would know there is much less chance of cracking etc. compared to fiber glass

Quote:

Originally posted by steveone

yeah the reiger ones are thicker than normal m3, thus giving the impression the car sits lower !!

steve

sounds good!!

.....any idea how much they are?

Daniel

#13 (**permalink**) 03-01-2003, 05:41 AM

Reiger infinity 1 lip spoiler........

steve

#14 (**permalink**) 03-01-2003, 06:00 AM

Quote:

Originally posted by dunitt_e36
sounds good!! .....any idea how much they are?

Daniel

lol.....i cant read german but heres a link to the reiger site, you can see the sideskirts here, there on a compact but you can stil see the size difference ..........!!

http://www.rieger-tuning.de/Modellshow/BMW/E36/089.pdf

nicot · #15 (**permalink**) 03-01-2003, 06:21 AM

maybe I can ask for a group buy for the infinity I lips from TCCA