FS: E36 M3 front brake upgrade...

[sunir]

moderators, I posted in this forum along with the for sale forum and E36 forum, because I feel as though this upgrade is most applicable to E36 owners/enthusiasts as well as track folks with the E36...if you guys could keep it here it would be nice, thanks

includes 2 front calipers fitted with bimmerworld solid guide pins/bushings, 2 front Euro floating rotors, stainless steel lines, and front pads (Hawk or cobalts, can't remmember)...all parts in very good condition, this setup stops the car nicely (I recommend using ATE Superblue fluid for street and track), I upgraded to Stoptech BBK because I was allowed to under the rules of the series with which I raced in '04, otherwise I'd have stuck with this setup, it just plain works! This would be a nice upgrade for any E36 at a fraction of the cost of an aftermarket bbk...asking $500 o.b.o for everything.

thanks

[Null]

I'm interested...I used to work for Mike Robinson (I know he's a friend of yours) so if we can work out a deal I'd I'm ready. Pm me or e-mail me Jon34511@gmail.com =) Thanks!

EDIT: I mentioned Mike because I'd have him install the brakes for me, they would be going on a 318is.

[sunir]

Originally Posted by Null

I'm interested...I used to work for Mike Robinson (I know he's a friend of yours) so if we can work out a deal I'd I'm ready. Pm me or e-mail me Jon34511@gmail.com =) Thanks!

EDIT: I mentioned Mike because I'd have him install the brakes for me, they would be going on a 318is.

Mikes a great guy and a good friend, if he does the work, you can bet it'd be done right ...I'll send you an email as per your request...

[tigruppe]

Guys,
To put this on a non-m car you will need the steering knuckles as well.
BTDT....

[Greyman09]

Still for sale?

[sunir]

Originally Posted by Greyman09

Still for sale?

yes...please let me know if you are interested...they are boxed and ready to go

[///M cubed]

Originally Posted by tigruppe

Guys,
To put this on a non-m car you will need the steering knuckles as well.
BTDT....

I'm looking at the same kit, theres one for sale here in australia second hand, TCM motorsport says i only need the calipers, caliper brackets, rotors, pads, discs and wear sensors. What are the steering kncuckles?

[sunir]

Originally Posted by ///M cubed

I'm looking at the same kit, theres one for sale here in australia second hand, TCM motorsport says i only need the calipers, caliper brackets, rotors, pads, discs and wear sensors. What are the steering kncuckles?

my kit is still available to sell...and I can ship anywhere...all you'll need are the M-knucles, these will allow the kit to bolt up to non-M cars and you can easily get this from a junk yard for cheap. My kit has everything...Euro floating rotors, M-calipers with solid inserts and pins, pads (I can even thow in an extra set), stainless steel lines, and hardware...

let me know if you are interested...

[///M cubed]

Cheers for the info, I'll call a wrecker and see if I can get the knuckles. Unfortunately there aren't too many wrecked M's in Australia, but I'll look around non the less.

[TYE]

If anyone wants the rears too I have the rear carriers, brakes, control arms, and axles for sale