KC BMW Meet 4/22

[95 240sx]

I honestly don't think many ppl will be down to dyno this early in the spring, lol, ...but i'm being totally honest... Late spring/early summer/early fall is probly the best time to get a big group for that...

Evan, are u coming? I hear you've aquired the E39 now... lucky!

-Dan

[bmwmillertime]

3-4 cars from salina, + other fourms too?

#1 BmwMillertime +3
#2....
#3....

[88325isboy]

Sweet see u there!

[Irish5.7]

After assessing the situation this weekend, there is no way that trailing arm is going to make it on this next week unless the powdercoating gets done in like a day...so i'll limp it up there so everyone can see how much toe-in I have, should be a good conversation piece

[88325isboy]

so it will be done by the meet?

[bmwmillertime]

Hooters Web site-
http://hooters.know-where.com/hooters/cgi/site?061#map1

Mapquest Directions-
http://www.mapquest.com/maps/map.adp...%20Restaurants

[88325isboy]

Sweet good work!

[95 240sx]

Word, see ya'll there!

-Dan

[Irish5.7]

so it will be done by the meet?

no, but I will be there with the car...takes about a week and a half for those peeps to get the powdercoating done

here is the best part, and some advice to those who ever replace the rear bearings, don't put them in backwards!!!!

these stupid bearings have a red seal and a black seal...in order for the abs to work correctly, they have to be installed in the right direction b/c get this, they have a "pulse generator" built into the bearing that somehow affects how the abs system works....last time i fooled around with the rear suspension i didn't notice this in the manual until after the alignment....not this time

see you all there

[bmwmillertime]

Is this right????
I hop I hope I hope, My ABS has been on since before I did the bearing, ????

[Irish5.7]

have you tried taking the abs sensor off each wheel and cleaning the end of it?? sometimes it gets enough crud on it where it can't read correctly and errors the computer out...but ya, bearings are often overlooked as the culprit

[bmwmillertime]

I was thinking about measuring the resistance and cleaning them out but Havin been able to get the time to do it. I was hoping to just have the fault read and be done with it, I also was looking into renting a Peke tool for the Airbag light I have,
Know anyone going tomorrow with one?

[Irish5.7]

I don't know what the hell a "Peke" tool is, the only thing I have is one of those oil/inspection reset tools. BTW, if anyone wants me to bring that up so you can reset yer stuff let me know and I'll bring it up.

So, we still shooting for 5:30?

[bmwmillertime]

Check it out!
http://www.peakeresearch.com/

And the one I was talking about!
http://www.peakeresearch.com/srstool.htm


There pretty cool!

[95 240sx]

Originally Posted by Irish5.7

So, we still shooting for 5:30?

Yessir!

-Dan