bmw 328is turbo

BMW_M3_EVO · #1 (**permalink**) 12-05-2006, 08:59 PM

Hey guys I got a 1996 bmw 328is project turbo car. I have all the stuff on the car, turbo, manifold, intercooler, but I dont know where to put the oil feed lines. Can someone help me out.

sk8er882 · #2 (**permalink**) 12-07-2006, 10:47 PM

I bought an oil distribution block (from techno550 on bimmerforums) that screws in where the oil pressure sending unit screws in. The sending unit then screws into the back of the distribution block. On the distribution block there is another screw hole for you to run an oil line from.

There are other distibution blocks that have more than one line so you could run for oil pressure and temp if you wanted.

Kris Kra33y · #3 (**permalink**) 12-14-2006, 02:03 PM

You can send one line which will go from the engine oil sencor which you would need to custom make then would go to the top of the turbo ( the smalll input hole ) Then send the oild exit ( large hole botom of turbo ) to the engine sump which you would have to drill a hole into preferbly the highest point of the sump