Finally!!! My turbo 325is with stock ECU tuning***video

[dredder]

So I took my turbo out for a few vids. If you notice, this clip is from a cold start around 50-60 degree F outside. I had to the revv the car little so I can get the temp up little before i start the drive. I am running at 9psi wastegate spring only with no boost controller. The car is on stock 325 clutch and its slipping bad. This is a 2nd gear pull and the end of third. I had to shut down since im the only one video taping and driving at the same time. Very dangerous, I would not remmond it at all. The setup is jerry rigged to get this car running and running flawless. I will be coating the piping all black (currently primer white) and cleaning up the engine bay a little.

Setup:
2.5 block
SC61 .63hotside
.140 MLS HG
42lbs ford racing injectors
SPA manifold
Dredder custom piping
ebay intercooler
Porsche 3.5" HFM
stock exhaust (need to pass emission in february) will do 3" turbo back after
Stock ECU tuned by ME (Titus = Tee*tus)

Click here to watch turbo-325-bmw

[Highboosted]

nice music.....

welcome to the boosted club! Your BOV return line is kinked and your calibration is having trouble catching the falling RPM to idle, but you knew that already. I'm really jealous!

BTW, If you want to convert to speed density and lose that Mass airflow meter I'm looking for someone with a turbo BMW to try it out. I'm currently using the MAFT-Pro from fullthrottlespeed.com on my Stealth and love it. I just don't have a BMW to use it on.

Keep us posted on how it is and keep them vids comming!