does anybody have this?

Nico5spd · #1 (**permalink**) 11-13-2003, 05:46 AM

http://www.siastuning.com/ProdforSalePlugnPlay.htm

if so, how is it? the deal sounds real good. tec 3 alone is 2 grand.

any complications?

single · #2 (**permalink**) 11-15-2003, 12:45 PM

There are a lot of guys on BF.C with it. They sound like they like it alot. $2600 is still a chunk of change for a stand alone ECU. I was thinking about running either Haltech or this. Not sure yet.

Wes

Nico5spd · #3 (**permalink**) 11-15-2003, 03:21 PM

well.... to get electromotive tec 3 module, with unterminated harness its about 2 grand. and it doesnt come with a 3 bar map..........

these guys are including the module, adaptor harness, 3 bar map ($200 value i believe), and a base program..

sounds like a sick deal to me

Scho · #4 (**permalink**) 11-15-2003, 10:21 PM

Plug n Play TEC 3 is probably what I wll get to tune my AA car.

Scho · #5 (**permalink**) 11-15-2003, 10:21 PM

www.viastuning.com

PortalBMW · #6 (**permalink**) 11-15-2003, 10:42 PM

Scho, where did you find that quote in your sig? Can you please link me? Sorry for going OT. Thanks

Nico5spd · #7 (**permalink**) 12-01-2003, 06:43 PM

i heard a rumor that TEC 3 does not support knock control? i have to do some research for this? anybody have any quick answers?

bimmer143 · #8 (**permalink**) 12-01-2003, 08:37 PM

Nick, over on Bimmerforums there are a few running the tec-3. Check out their Forced induction section look for a guy going by EMC he just put together a custom turbo kit running Tec-3 and a t3/t4. He's putting down 406whp with only 8psi! he can probably answer most of your questions.

josh@werksgroup · #9 (**permalink**) 12-02-2003, 09:23 PM

TEC 3 supports knock control. It's a good setup.

E36M3 · #10 (**permalink**) 12-16-2003, 03:30 PM

I'm running TEC3 custom tuned by Sias Tuning. He did a great job. Last dyno pull was about 6 months ago. Car made 454 whp with TEC3 and tuning by Sias Tuning. Before that, the car had been running like shit with RMS software.