What kind of body kit is this?

[Frdrifter121588]

http://www.dtmpower.net/pictures/bav...4/DSC_9654.jpg

[CleanAzzE30z]

You mean the front valance? Or the whole body? The body looks like a custom jobby, modeled after the greatest widebody of all time (the E30 ///M3, lol jk). The front looks remarkably like a 2002 front spoiler commonly sold. I believe that front kit (if its what I think it is) is in the BMP catalog for the 2002's.

[ESP]

The car is an E21 (320i) I have never seen a kit like that. I would have to agree it is most likely custom.

[CleanAzzE30z]

Yeah I forgot to mention that its an E21, which would make the 2002 front valance of note.

[BMW2ner]

I am about 90% sure that I red in performance bmw that, that is a complete custom widebody. I hope I helped.

[Frdrifter121588]

Thanks, that kit looks pretty sweet. I want it.

Oh, does anybody have more pictures of that car.

[carstereopro]

That's Mike Morris's friend's car. I belive mike restored and tuned it.

Mike owns Schneller Tuning 1/2 hour from my house, he specializes in vintage BMW performance.

If I remember right that car had the green intake manifold in the pics in Performance BMW that covered the Bavarian Autosport Show and Shine.

I believe that was a very limited production factory widebody (like 1 of 8 produced or something crazy like that)

If you really want to know, contact Mike.

His web site is www.machschnell.com

He is down to earth and friendly.

[JJG323]

Manny DeSousa is from Providence, and is at the Bav auto show every year in Portsmith NH.

Note: the background of the picture, its taken at the show.
Manny is there next to his car as well.
Here is a detailed article about this car.
http://www.boston-bmwcca.org/bimmer/...stonmember.asp


The kit is a fiberglass one, which he had to remove large sections of the quarters to graft them on. The kit personally is not my style, Manny's rims are custom 15 inch HRE, and the motor is a carborated m10.

(You really need a custom m20 2.8 liter stroker with a t04 turbo on there to back up the looks of the car with performance.)

Manny has a talked about creating a rear wing that remebles the group five e21 racers.

Manny also said it may be time to sell the car but he wants 14K or something.

I know Manny because I have working on my 79 323i for a long long time. Its orange with a custom 2.8 liter stroker with knife edged 524td crank that I am bringing to the show in october.

Here is my website:
http://www.cardomain.com/ride/579694/6

A few sample pictures:






Mike Morris and other guys always go to this show, its one of the largest BMW gathering on the east coast.

later,
Joe

[vtbimmer]

Originally Posted by JJG323

Manny DeSousa is from Providence, and is at the Bav auto show every year in Portsmith NH.

Note: the background of the picture, its taken at the show.
Manny is there next to his car as well.
Here is a detailed article about this car.
http://www.boston-bmwcca.org/bimmer/...stonmember.asp


The kit is a fiberglass one, which he had to remove large sections of the quarters to graft them on. The kit personally is not my style, Manny's rims are custom 15 inch HRE, and the motor is a carborated m10.

(You really need a custom m20 2.8 liter stroker with a t04 turbo on there to back up the looks of the car with performance.)

Manny has a talked about creating a rear wing that remebles the group five e21 racers.

Manny also said it may be time to sell the car but he wants 14K or something.

I know Manny because I have working on my 79 323i for a long long time. Its orange with a custom 2.8 liter stroker with knife edged 524td crank that I am bringing to the show in october.

Mike Morris and other guys always go to this show, its one of the largest BMW gathering on the east cost.

later,
Joe

Yeah I remember that car at the show. I have some pics of it kickin around but they are 35mm.

Your car is lookin sick. Caint wait to check it out this October.