Carbon Fiber Hoods for E36 and E46

ADZ · #1 (**permalink**) 01-23-2002, 03:07 PM

I've got a few real CARBON FIBER hoods for E36 or E46, for both sedans and coupes. $550, email me at aaron@aaronsdropzone.com for details. I should have a picture posted here tomorrow.

Below is the best picture I have been able to get so far. This afternoon I'm hoping to get some high-quality pics, with pictures of the other hoods as well. This was scanned out of a catalog:

Ali · #2 (**permalink**) 01-23-2002, 04:27 PM

whats going on with the in pro angel eyes? Have you gotten the shipment yet?

ADZ · #3 (**permalink**) 01-23-2002, 06:30 PM

I called In-Pro today and was told that the lights will hopefully be coming in next Wednesday. I'm still taking pre-orders, $325 shipped! Email me at aaron@aaronsdropzone.com for more details!

Ali · #4 (**permalink**) 01-23-2002, 06:53 PM

Quote:

Originally posted by ADZ
I called In-Pro today and was told that the lights will hopefully be coming in next Wednesday. I'm still taking pre-orders, $325 shipped! Email me at aaron@aaronsdropzone.com for more details!

can you do COD?

BMWg84 · #5 (**permalink**) 01-23-2002, 08:20 PM

Quote:

Originally posted by Ali

can you do COD?

HAHA, good luck

ADZ · #6 (**permalink**) 01-24-2002, 07:56 AM

Sorry, no COD's at this time, but I do accept PayPal, Checks, and money orders. I ship UPS and I always insure for the value of the package, plus double the cost of shipping. Email me if you have any questions: aaron@aaronsdropzone.com

RichP · #7 (**permalink**) 01-24-2002, 10:06 AM

I shot you an email about the E46 hoods.

MMTuning · #8 (**permalink**) 01-24-2002, 11:51 AM

I take it that these are Gravity molded and not compression molded?
What is the weight on one and how durable are they? Do they have undersuports? Stock mounting hardware, or hood pins?

///M ike · #9 (**permalink**) 01-24-2002, 12:29 PM

Got any high-quality pics? Want to see what the edges look like

JohnSergio · #10 (**permalink**) 01-24-2002, 04:42 PM

it doesnt look like they have the stock vents....

can you get some better pics?

how do they mount?? how do they fit as compared to stock hoods??
who makes these hoods that youve "got a few of"

poohlvhun · #11 (**permalink**) 01-24-2002, 08:05 PM

I'm interested in the cf hood for sedans. Can you post more details please?

cheers.

328bimma · #12 (**permalink**) 01-24-2002, 08:16 PM

Quote:

Originally posted by poohlvhun
I'm interested in the cf hood for sedans. Can you post more details please?

cheers.

me 2~

Jerry

blackhawk · #13 (**permalink**) 01-25-2002, 07:21 AM

Quote:

Originally posted by ///M ike
Got any high-quality pics? Want to see what the edges look like

Hi .. I wonder what you specificly want to look at the edge ? .... just for my own education so I know what to look for when I have the money to buy my CF Hood.

Is it that the edge will show the quality of the hood or the edge is usually the part of a CF Hood where they screwed most of the time ?

thanks for your info ..

ADZ · #14 (**permalink**) 01-25-2002, 08:38 AM

Below are a couple pictures of the E36 Hood. They are made of fiberglass overlaid with CF so they weight between 20-25 lbs but they are less fragile than 100% CF hoods. Hood pins are included, and recommended, but you can use the factory latch from your stock hood as well. Shipping depends on where you live and the carrier is at your discretion.

I will hopefully have E46 pictures up by the end of the day.

Email me if you have any other questions

Lower Resolution:
Picture #1 Lower-Resolution

Picture #2 Lower-Resolution

For High Resolution pictures go to my site and scroll down a little for the hoods, click on the thumbnails:

ADZ Motorsports

ADZ · #15 (**permalink**) 01-25-2002, 12:06 PM