330ci dsc will not disengage

MARKSDIDDY92 · #1 (**permalink**) 08-12-2003, 11:09 AM

The other night we were in my cousins 02 330 and we were trying to rip out some donuts with the dsc off. When we go to doubble clutch it suts down as if the dsc is still engaged we tryed it both ways with dsc on and off. Has any one else had this problem just trying to get some feedback before he takes it to the stealler still under warrnty.

tdc · #2 (**permalink**) 08-12-2003, 11:56 AM

Are both the DSC and BRAKE light illuminated on the dash?

If not, then you didn't completely shut off DSC. You need to hold the DSC button down for at least a full 5 seconds so both the DSC and BRAKE lights are illuminated.

Oh, and have you considered that you are just glazing your clutch instead?

MARKSDIDDY92 · #3 (**permalink**) 08-12-2003, 04:04 PM

Well the rpms dont increase they stay at a low rpm so i have ruled out clutch glazing. But no the brake light was not on so hold it for 5 sec hee. Well we will try that thanks tdc you seem very knolageable when it comes to e46's thanks allot for your help. This saved us allot of wasted time.

tdc · #4 (**permalink**) 08-12-2003, 04:46 PM

Good luck and don't go too crazy. Be safe!

Lindz · #5 (**permalink**) 01-05-2005, 03:40 PM

I have an 04 330, and the same happens with me...rrrrreally f@#%*%strating

MARKSDIDDY92 · #6 (**permalink**) 01-05-2005, 04:43 PM

push and hold the dsc buttion for 5 sec. and the dsc light will go on and the brake light will turn amber, then let the fun start.

01zincguy · #7 (**permalink**) 01-06-2005, 05:35 PM

Yeah, it took me awhile to figure out that you have to hold the dsc down too. But after you see the [brake] light turn amber, the fun WILL begin

Ryan