I need opinions please on drop springs

LeDevil · #1 (**permalink**) 06-19-2007, 08:37 PM

Ok I did soem searching and came up with a few different posts and still stumped. So here's what I'm going for, I want 2.5 to 3 inchs of drop with a fair stiffness. So please if you could post a pic of your car and tell me what your using I would greatly appreciate it.

Thanks LeDevil

bmw Turner · #2 (**permalink**) 06-20-2007, 04:21 AM

Pedders Suspension - Straight advice, specialists you understand and... No Bull
i am using full pedders sports ryder suspension.
you can see pics of my car in the gallery in 3-series

325i Phoenix · #3 (**permalink**) 06-20-2007, 10:53 AM

I'm using Bilstein shocks and springs. It lowerd my car 2 inches

Harls · #4 (**permalink**) 06-26-2007, 06:10 AM

Sorry i don't have a piccy of my old E30 but i can tell you that I had lowered king Springs (only the 2inch) and had 15" 205's 50's at the rear and they filed the guards nicely The fronts were only slightly lowered but that was good.

Only drama I have found is that the King Springs are quite hard, I got lots of rear bounce and front bounce and it wasn't nice there was little give.

Don't lower it too much I say. the bloody sump and exhaust sit very low I found, and it became real impratical.

just a thought