Do 6 1/2" speakers fit?

KevinF. · #1 (**permalink**) 03-20-2002, 05:19 PM

How hard to put in 6 1/2" in kick panels and on rear deck?

Alex Mc · #2 (**permalink**) 03-20-2002, 06:00 PM

kick panels would be a bitch, but you could make the holes on the rear deck bigger easily enough..

matt325is · #3 (**permalink**) 03-20-2002, 06:00 PM

I have 6.5's in the rear deck, I had to use different holes though. The stock holes were too wide for the speaker. For the front I have 5.25in component sets, with the tweeter installed by the mirror. I did all this stuff myself... I was pretty straight foward.

matt

rayz · #4 (**permalink**) 03-20-2002, 06:03 PM

you might have to make a spacer. thus, it will not go under the panel but over. just use a grill... pretty much raised surface mount

KevinF. · #5 (**permalink**) 03-20-2002, 06:43 PM

i just went out and tried with a 6 1/2" speaker and it fits in all the slots easily..but yea kick panel the tweeter sticks out so i may have to buy components

ESP · #6 (**permalink**) 03-20-2002, 07:19 PM

If you don't mind modifying doors you can do 6.5s in the doors no problem...

2FLYBY · #7 (**permalink**) 03-21-2002, 04:32 AM

go 5 inch in the kick panels
6.5 in the shelf is easy