NJ 1997 BMW 328i Supercharged + much much more

[Reset]

• 1997 BMW 328i Supercharged
• 66,011 miles garage kept
• 5 speed manual
• I am the original owner and never been in a major accident (fender bender once in parking lot damaged the stock bumper and headlights which are no longer on the car anyway) Over $40,000 invested.
• Never had any major mechanical problems or broke down. No check engine light or any major problems at the very moment.
• Paint is in near showroom condition and car itself is in mint condition with the exception of 2 small dings on the entire car.
• Toyo T1S tires are about 90%, radiator, subframe bushings, and battery was replaced a few thousand miles ago. Most mods were installed and barely used since I only drove it to car shows. Mobil 1 oil change on schedule and recently done.
• Car runs very strong with the 3.23 LSD 25% lockup (from a M3) and SC.
• The car drives straight and smooth. No shaking or vibrations going or stopping. Not that harsh for a lowered car due to the sport springs and shocks.
• $11,500 or TRADE for a SUV / truck preferred but I will entertain any trade offers.
• Located in Edison NJ 08820
• Featured in Dec 2002 Performance BMW magazine which I will include a new copy of the mag. Sponsors were Toyo Tires, Meguiars, Corbeau, and UUC. It was DTMPower car of the month back in 2001 or 2002.
• Will include the stock steering wheel with airbag, airbox, brakes, engine cover, headlights in like new condition, and whatever other stock parts i can find.
• Email me at WillyShh@Gmail.com for any questions.
  

Mod List

• -Engine-
• -Custom Vortech V2 Supercharger kit - 6 PSI
• -UUC System U catback exhaust
• -Aquamist 2c variable water/alcohol injection kit
• -Carbon Fiber engine cover
  
• -Body-
• -Zeemax slimline body kit
• -AC Schnitzer side skirts
• -M3 powered + heated rear view mirrors
• -Mtech rear trunk spoiler
• -Body colored M moldings
• -BMW motorsport international molding badge
• -Kamei wrap around Headlight trim
• -Euro Clear blinkers
• -35% tinted windows all around
• -Red painted roundels
• -Carbon fiber ACS door pillars
  
• -Suspension-
• -19x8.5" MVR Magnum wheels
• -Toyo T1S 235/35/19 tires
• -H&R Sport lowering springs
• -Bilstien sport shocks
• -ActiveAutowerkes upper strut bar
• -Racing dynamics front & Rear lower Sway bars
  
• -Transmission-
• -3.23 LSD rear Differential 25% lockup
• -UUC Evo Competition short shifter
• -UUC clutch stop
• -UUC Tranny mount and enforcers
  
• -Brakes-
• -UUC Big brake kit Front w/ 14" swirl slotted 2 piece rotors and red 4 piston calipers
• -UUC Big brake kit Rear w/ 13" vented rotors w/ red calipers
• -Stainless Steel brake lines front and rear
• -Titanium composite front brake pads
  
• -Lighting-
• -European Ellipsoid headlights
• -Custom OEM 5 series Angel Eyes conversion
• -Custom aluminum billet low beam trim
• -Xenon HID Headlight Conversion
• -H7 Eurolite fog light conversion
  
• -Interior-
• -Corbeau CR1 reclining racing seats
• -Corbeau 3 point racing harness
• -Momo Commando steering wheel
• -UUC Rob knob shift knob
• -ACS type racing pedals + ACS dead pedal
• -Aluminum interior trim
• -Alimunim E-brake handle
• -CEC aluminum cluster guages
• -Chrome shifter surround
• -Custom interior ceiling mood lighting
• -Carbon fiber glove box trim
• -Carbon fiber center console
• -Aluminum Gauge cluster
• -Sport Comp A/F meter
• -Sport Comp Boost guage
• -Sport Comp Fuel pressure guage
• -Vinyl black door inserts
• -Black leather rear seat and black rear deck
  
• -ICE-
• -Kenwood KVT-M700 indash 7" touchscreen LCD monitor
• -Playstation 2 mounted in the trunk (PS2 does not play discs anymore)
• -Kenwood 10 Disc CD Changer custom mounted in the trunk
• -Audiobahn chrome 10" AW1000X subs x2
• -JL Audio 500/1 Amp
• -Custom box fully mirrored w/ blue neons and plexiglass casing
• -7" LCD TV in the trunk lid wrapped in black vinyl
• -Viper Alarm

Old school shot!

[325ispeed]

How much horsepower does this beast make?? Whats the lowest you are willing to accept for an offer? And does the car have any defaults??

[Reset]

Replied to your email.

[325ispeed]

k thanks

[Reset]

For sale or TRADE for a truck or something with room.

[M53]

is car still available? if so please pm details...thanks

[Reset]

Still available. PM sent or email me @ WillyShh@Gmail.com

[SchwarzUndBlau]

I NEED to know where you found those headlights.....or the ones in your pic with the yellow BMW with similar ones.....I have looked ALL OVER for those and can't find them!!!

[Bradford1]

How much horsepower does this beast make?? Whats the lowest you are willing to accept for an offer? And does the car have any defaults??

[Reset]

Originally Posted by SchwarzUndBlau

I NEED to know where you found those headlights.....or the ones in your pic with the yellow BMW with similar ones.....I have looked ALL OVER for those and can't find them!!!

You wont find them for sale. I custom built them myself. This was way before any angel eye kits were around. Heres what I did,

1. Start with ellipsoids
2. Purchase 2 pairs of oem E39 5 series headlights.
3. Gut and open the E39 headlights.
4. Tear out the rings and HIGH BEAM angel ring brackets from both pairs of headlights. Need 4 pieces of E39 high beam ring brackets. The low beam brackets are really thin and doesnt look good.
5. Break out the dremel and go to town on the brackets and ellipsoids. Make them fit. Each high beam bracket will fit each of the low and high beams of the ellipsoids with a lot of dremeling and fitting. Without the high beam brackets, there will be a huge gap in the headlights. Some pics of my car above are without the 2nd set of high beam brackets so you see the gaps.
6. Purchase a demon eye kit and use the fiber optic cables and light box for lighting. Install them.
7. Now you will find a gap in the low beam from the actual projector lens and the E39 high beam bracket. Since the projector lens is small and held up by braces in the back of the headlight. Now measure the diameter of the ring needed and find a aluminum shop with a CNC machine. Give them the EXACT specs and have them machine out a piece of fit that gap. The piece I have was machined out by a friend who actually made the same setup. So there is only 2 sets of these headlights ever made.

Took me about 3-4 days of dremeling and fitting to put the headlights together. The entire project took months however.

[Reset]

Originally Posted by Bradford1

How much horsepower does this beast make?? Whats the lowest you are willing to accept for an offer? And does the car have any defaults??

PM sent

[Reset]

The car is sold. Thanks for looking.