E36 323i upgrades?? i'm after chip etc, where from ??

[01UDE]

Originally Posted by FLYN-BM

how hard is a pulley kit to fit, can you do it yourself, might look into one.. whats wrong with changing the underdrive pulley..? and how do i go about getting some US spec M3 cams..? thanx heaps for all ya help..

Pully kit, hmm well you could give it a shot, but find a mate if u can that knows how to install and tension that kinda stuff, need tensioner ect. The cams, well give me a few weeks, i'm still learning how they will go in because only the US ones will work. Matt from umnitza has found some @ a 2nd hand yard in america for me. So once i know they will fit and be benificial i'll ship em over.

[01UDE]

oh, there is a write up from DINAN about touching the underdrive pully's, Dave(DCR62) shoed me it, basicly causes more vibrations and stress on the crank. So eventualy everything will let go.

[Gio-MTW]

Originally Posted by Aaron318iS

Just out of curisoity, are the injectors between 325 and 328 the same size ? Considering the intake manifold differences etc.

definitely there is a difference

323 green ones
328 pink ones

which has a logical 323/328 difference pink ones spray's more fuel and relatively engine runs aggressive ...

conclusion --- you own 323 , you have done some (air mods) you definitely need a pink ones ...believe me