For Sale: Various BMW parts [Including S50B32]

[MrBlonde]

Various parts for sale located in Sydney. If you want to make an offer please PM me.

1. BMW S50B32 Engine built for forced induction
Description:
3.2 litre 24 valve BMW DVANOS S50B32 engine (long block). Traveled 37,000 kilometers (23,
000 miles) on this engine from new. The engine has been built for forced induction, including custom forged low compression pistons (8.0 : 1 compression ratio), new ring set, new bearings throughout, O ringed head and block, all new gaskets throughout.

Condition: Used, excellent condition (37,000 kilometers)

Price: $15,000 AUD




2. BMW S50B32 Custom Forged Low Compression Pistons
Description:
Custom forged low compression pistons to suit BMW S50B32 engine with 8.0:1 compression ratio.

Condition: Used, excellent condition (less than 5,000 kilometers)

Price: $2,100 AUD

3. BMW 210 mm diff centre
Description:
BMW 210mm LSD by itself with the standard locking rate of 25%, it will suit any 210 series diff (OEM fitted to E36 M3 3.2 litre, E34 M5 & 540i, 7 & 8 series, etc).

Condition: Excellent.

Price: $1,200 AUD



4. BMW Motorsport Group A crank for S50B32 (new)
Description:
BMW Motorsport Group A racing crank (part number 1121 4276 816). Crankshaft weighs 22.5 kgs. This is not a stock crank but a motorsport part – a whole different ballgame.

Condition: New, still in BMW Motorsport box

Price: $7,000 AUD




5. BMW S50B32 used pistons
Description:
Stock pistons from S50B32 engine, two sets of six in good condition.

Condition: Used, good condition

Price: $500 AUD for set of 6


6. BMW S50B32 used rods
Description:
Stock rods from S50B32 engine, set of six in good condition.

Condition: Used, good condition

Price: $1,000 AUD for set of 6


7. BMW S50B32 used coils
Description:
OEM coils from S50B32 engine, set of eight. All confirmed functioning.

Condition: Used, excellent condition

Price: $1,000 AUD for set of 8 (2 spares)




9. 60 litres of VP C16 race fuel
Description:
VP Racing 55 gallon drum of C16 about a third full (65-70 litres). Pickup from Auburn location only.

Condition: Good

Price: $250 AUD




10. BF Goodrich Comp TA Drag Radials 275/50 R15 (Two)
Description:
Two BF Goodrich drag radials – Comp TA now unavailable new (superceded by BFG gForce Drag Radials which are inferior). Rubber has had 11 passes, 95% good.

Condition: Used, good condition

Price: $500 AUD






12. Porsche 930 Turbo CV Joint
Description:
Porsche 930 CV Joint, installed but never used.

Condition: Used, excellent condition

Price: $500 AUD


13. BMW S50B32 Engine disassembled
Description:
3.2 litre 24 valve BMW DVANOS S50B32 engine short block. Includes block with original rods, pistons and crank still installed, water pump and oil filter housing assembly. Includes bare head with guides, set of 24 double valve springs, top and bottom retainers, buckets. Includes oil lines, some DVANOS parts, timing chain, multiple throttle bodies, plenum and airbox. Includes cambox (damaged) and cam cover. Please contact me for any detailed questions.

Condition: Used, good condition

Price: $4,000 AUD

15. BMW 18” wheels from E46 M3
Description:
OEM 18” alloy wheels from E46 M3 traveled 50,000 kilometers in good condition. Currently have Conti tyres in poor condition mounted. Some curb rash on two fronts. Slight rash on one rear wheel (see photos).

Condition: Used, good condition (50,000 kilometers)

Price: $1,500 AUD








16. BMW Satellite Navigation CD drive Mark III
Description:
OEM BMW Sat Nav CD drive Mark III from E46 M3 with V10 Sat Nav data disc.

Condition: Used, excellent condition.

Price: $450 AUD






19. CryO2 Intercooler spraybar CO2 cooling kit
Description:
DEI CryO2 intercooler spray kit using CO2 to cool intercooler surface. Includes:
• DEI 10lb CO2 bottle (Used twice)
• DEI intercooler spray bar 19”x9” (Used twice)
• DEI Co2 Solenoid and arming button (Used twice)
• Wedderburn CO2 scales for refilling (brand new in box)
• Custom made CO2 refiller line and fittings (Earls braided lines and fittings – brand new unused)

Condition: Used, excellent condition (Used twice)

Price: Cooling kit $300 AUD
Refill kit $400 AUD

[Pegus]

Just want to say this is probably one of the best For Sale posts this year lol

[MaDhAtTeR]

hey kenny, if you dont mind postage, ill take the microtech and ignitor if you can wait a couple of days for me to make payment? spent a bucket load over the weekend due to EOFY and need a couple of days to transfer money around to pay for everything before I can spend again (direct deposit ok?)

Just wondering if you have the manual for the ecu too? also what map did they load into it default, or what is loaded into it now?

Thanks

Edit: I see the software listed seperately, do me a deal on the package for the lot?

[MrBlonde]

Originally Posted by MaDhAtTeR

hey kenny, if you dont mind postage, ill take the microtech and ignitor if you can wait a couple of days for me to make payment? spent a bucket load over the weekend due to EOFY and need a couple of days to transfer money around to pay for everything before I can spend again (direct deposit ok?)

Just wondering if you have the manual for the ecu too? also what map did they load into it default, or what is loaded into it now?

Thanks

Edit: I see the software listed seperately, do me a deal on the package for the lot?

MH, mate happy to sell to anyone but please be aware there is a lot of interest in MicoTech items on the ausrotary forum.

[MaDhAtTeR]

yeah ill definately take them no problems mate, just wondering if you would have thrown the software in with the other parts. But if not, thats cool . If you pm me your account details ill make sure its paid through tomorrow night.

[MrBlonde]

Details sent through for MicroTech items.

[MaDhAtTeR]

received and payment sent

[MrBlonde]

Items 14, 20 and 21 SOLD.

MicroTech computer, ignitor box and laptop adaptor

[MrBlonde]

Item 17. Bluetooth ULF SOLD

[MrBlonde]

Bump

[imboss2u]

ill take item 18 kenny

[MrBlonde]

Item 18 SOLD

[MrBlonde]

Item 8 SOLD

[MrBlonde]

Some photos added.

[MrBlonde]

All PMs now answered, please contact me again if your did not get a response.