Quote:
Originally Posted by DFECT-ME  ai, im in the midst of installing my amp wiring kit, but im a bit stuck. i bought a 2 channel 200 watt installation kit. i have installed the red power cable, black ground cable, sub leads from the headunit, but im stuck on the very thin blue trigger cable. i know that you have to connect it to one of the wires at the back of the head unit, but i have know idea which one i have to connect it to as there are about 10 of the small wires. the head unit i have is an Alpine CDE-9846E if that helps. if any of you could let me know which cable i have to connect the thin blue cable to that would be much appreciated. thanks in advance... 
ALPINE CDE-9846E  | Blue or Blue/white striped..... Should be labled "amp turn on" or "Remote turn on".... Not the one labled "antenna".
__________________ Phil Chartier
Carstereopro
Forum Sponsor / Vendor DTMPower.net
------------------
New England Manufacturer's Representative
Boston Acoustics / McIntosh / Autopage / Panasonic / Planet Audio / Video Stream Technologies / WAAV Technologies / Avidworx / Azentek Mobile Computing
For HID's e-mail: mccmotorsports@comcast.net
For Tech Support, PM me or post in the car audio section.
------------------  |