CDOC sent me some pictures today of the finished mold for the front bumper (which will also have a LTW-style CF spitter) and my CF copy is setting up as we speak! The bumper is basically the E46-M3 style opening flipped upside down with the brake ducts angled to match. About an inch has been added to the lower section except for the center raise area of course. Parking lights and indention are also gone.. very clean.
The hood shown is installed and is a final product with gel coat. It will be available with or without vents. It is extremely light and very rigid.
Nice shot of the wheels as well.. 18x8.5 13mm offset (E34 5-series fitment) with 235/35-18 Michelin Pilots all around.
More to come.. mirrors, splitter, rear bumper/diffuser, decklid, and ptg Evo wing.
The rollbar is also pictures, which was previously completed..
Bumper mold..
<img src="http://www.dtmpower.net/ppost2/data/500/459e30_plug.jpg">
Front34 1..
<img src="http://www.dtmpower.net/ppost2/data/500/459front341.jpg">
Front 34 2..
<img src="http://www.dtmpower.net/ppost2/data/500/459front342.jpg">
Hood 1..
<img src="http://www.dtmpower.net/ppost2/data/500/459fronthood1.jpg">
Hood 2..
<img src="http://www.dtmpower.net/ppost2/data/500/459fronthood2.jpg">
Wheel Closeup..
<img src="http://www.dtmpower.net/ppost2/data/500/459wheelcloseup.jpg">
Rollbar with quick-release harness bar.
<img src="http://web.mawebcenters.com/motorsportconnections/images/Rollbar1.jpg">
Thoughts, questions, etc are welcomed.